Before Use - Rowenta X-TREM POWER RO54 Serie Manual Del Usuario

DESCRIPTION
16 Microfilter* cartridge
a - Microfilter (Ref. RS-RT3735)
b - Motor protection foam
Your vacuum cleaner is fitted either with a (H)EPA*
filter cartridge or a Microfilter* cartridge
17 a - UNIVERSAL Wonderbag* dust bag
b -Textile dust bag* (ref. RS-RT2274)
Accessories
18 Flexible hose with power nozzle ERGO COMFORT
a - Ergonomic ERGO COMFORT handle
b - Built-in brush (EASY BRUSH)
c - Mechanical power regulator (POWER CONTROL)

BEFORE USE

1 • Unpacking
Unpack your appliance and remove any stickers. Keep your
guarantee in a safe place and read the instructions carefully
before using your appliance for the first time.
2 • Hints and precautions
The power cord should be unwound completely before using
the appliance.
Do not snag or pinch the power cord, and avoid trailing it over
sharp edges. If you use an extension cord, ensure that it is in
perfect condition and appropriate to the power rating of your
vacuum cleaner. Never unplug your appliance by pulling on
the power cord.
VACUUMING
1 • Assembling the parts of the
appliance
Slot the hose into the suction opening (fig.1) and turn until it
locks. To remove, turn in the opposite direction and pull
(Fig 2)
• Slide the metal telescopic tube (19) onto the end of the
handle (18a) (fig.3)
• Fit the floor nozzle (20) to the end of the metal telescopic
tube (Fig.4)
• Set the metal telescopic tube to the required length using
the telescopic adjustment system (fig.5)
Fit the appropriate accessory to the end of the metal
telescopic tube or the handle:
- For rugs and carpets: use the all surface floor nozzle (20) in
the brush retracted or Turbo brush* position (fibres and
animal hair).
*Depending on model: equipment specific
to certain models or optional accessories.
19 Telescopic metal tube ERGO COMFORT
a - Handle/tube locking system (LOCK SYSTEM)
b -Tube adjustment button
20 Standard all surface floor nozzle
21A Standard parquet nozzle*
21B Nozzle with removable brush*
a – use on smooth surfaces with crevices
b – use on parquet
22 Turbo brush*
23 Mini turbo brush*
24 Crevice tool*
25 Upholstery nozzle*
Never use your vacuum cleaner without a dust bag and
filtration system (cartridge).
To avoid the above, your appliance is equipped with a security
system (14) to detect the presence of filter cartridges (15a*,
15b*, 16*).
Never move the vacuum cleaner by pulling the power cord,
the appliance should always be moved using the transport
handle. Do not use the power cord to lift the appliance.
Switch off and unplug your vacuum cleaner after use. Always
switch off and unplug your vacuum cleaner for maintenance
or cleaning. Only use genuine Rowenta or Wonderbag dust
bags and filters.
Only use genuine Rowenta accessories. Check that all the
filters are correctly installed.
If you have any difficulty obtaining accessories and filters for
this vacuum cleaner, contact Rowenta customer services.
- For smooth surfaces with crevices (such as tiled floors): use
the all-surface nozzle (20) with the brush extended or, for
better results, use the smooth surface nozzle* (21B.a*)
without the removable brush.
- For fragile surfaces, such as parquet, it is recommended to
use the standard parquet nozzle (21A*) or the nozzle with
line of bristles (21B.b*).
N.B.: The nozzle for smooth surfaces with crevices
21B.a* is used to measure performance associated
with the energy label. This nozzle allows you to
optimise the dust-collection performance of your
appliance on smooth surfaces with crevices.
- For corners and difficult areas: use the crevice tool (24)*.
- For furniture and fragile surfaces: use the built-in brush
ERGO COMFORT (EASY BRUSH) or the upholstery nozzle
(25)*.
7
EN