Daewoo International DTC-370 Manual De Instrucciones página 13

IN USE LED INDICATOR
The IN USE led will light when you are using the phone either by pressing
REVIEWING, CALLING BACK AND DELETING INCOMING CALL
The telephone can record 35 incoming calls. When the memory is full, the earliest one (except VIP) will be
replaced.
If the calling number is a hidden number the LCD displays ....p....
If incoming call is from an area without Call ID service, LCD displays ....o....

Reviewing incoming call

In on-hook or off-hook state. Press ▲ or ▼ key to review the incoming messages.

When all records are checked, LCD displays ...END...

Calling back incoming call

In on-hook or off-hook state, press ▲ or ▼ key to check the desired number.

Press REDIAL key, the number is dialed out automatically.

Or press REDIAL key twice, the telephone auto-add "0" to long distance call number and dial it out.
Calling back the local area call: The telephone can auto filter local area code, after setting the local area
code (Refer to local area code setting).
Calling back the long distance call:
If LCD displays a number which is long distance call, press REDIAL key twice, the telephone will auto-add "0"
and dial out the number displayed on LCD. If the line is busy, press REDIAL key to dial out the number
repeatedly.

Deleting incoming call
1. Review the desired incoming number.
2. Press DEL key to delete the number, then LCD displays the next number.
Note: Press DEL key for 3 seconds, all the incoming message will be erased.
REVIEWING, CALLING BACK AND DELETING OUTGOING CALL
The phone can record 5 outgoing messages, sequence number and conversation time. You may review, call
back and delete outgoing calls. If over 5 outgoing calls, the earliest one will be replaced. When you review
outgoing call, LCD will not display real date and time, but display the conversation time.

Reviewing outgoing call
1. In on-hook or off-hook state.
2. Press OUT key, LCD displays the last dialed number.
3. Press OUT key continuously, LCD displays ...END... after all outgoing numbers are reviewed.

Dial back outgoing call

In on-hook or off-hook state.

Press OUT key to check the desired number.

Press REDIAL key, the number will be dialed out automatically.

Deleting outgoing Call

In on-hook or off-hook state, press OUT key to check the number.

Press DEL key to erase it, and LCD displays the next number.
Note: Press DEL key for 3 seconds, all the outgoing calls will be erased.
All manuals and user guides at all-guides.com
DTC-370
13
or picking up the handset.