Data Rating Label; Service Information - Thermador T24UR925LS Manual De Uso Y Cuidado

Hi-alarm is activated (due to high
temperature inside the appliance),
HI is shown on the display LED.

Data Rating Label

The data rating label shows the model and serial number of your appliance. It is located in the interior of the cabinet, at
the opposite side of the hinge.

Service Information

For handy reference, copy the information in the form below from the data rating label located in the interior of the
cabinet, at the opposite side of the hinge. Keep your invoice for Warranty validation.
Model Number
Serial Number
Date of Purchase_
Dealer's Name_
Dealer's Phone Number
Service Center's Name_
Service Center's Phone Number
Page | 12
Appliance opened frequently.
The ventilation openings have been
covered.
A large amount of product, or warm
product was placed into
appliance.
Excessively warm environment.
Door gasket is not sealing.
Do not open
unnecessarily. Press alarm once to
deactivate.
Remove obstacles at the ventilation
openings located at the base of the unit
and in the refrigerator interiors. Press
alarm once to deactivate.
Wait until the products cool off or
remove the warm products from the
the
appliance, then press alarm once to
deactivate.
Avoid placing the unit in direct sunlight,
or near a heat source. Press alarm once
to deactivate
Inspect the condition of the gasket. If
damaged, cold air can escape the
cabinet and cause the temperature to
rise. Press alarm once to deactivate.
the appliance