Battery Changing; Manufacturer'S Warranty - Lintec DT-20 Serie Manual

8. MEASURING OF TEMPERATURE INDICATION UNITS
8.1 Press shortly once the °С/°F button.
8.2 During the temperature indication, press five times the °С/°F button.
8.3 After fifth pressing, °F or °С appears on the digital indicator; this indication means that
the device has changed its measuring unit system.
9.1 Loose three fastening screws on the handle cap and remove the cap.
9.2 Remove the battery department form the handle cap and change batteries installed into it.
During battery changing, ensure the required polarity specified on the battery department.
9.3 Re-install the handle cap and tighten its fastening screws.
DURING BATTERY CHANGING, BE SURE NOT TO DAMAGE WIRES, WHICH
CONNECT THE BATTERY DEPARTMENT WITH THE BAR ND ELECTRONIC
10.1 The manufacturer guarantees the compliance of the Digital Temperature Spear DT-20
with the specification TU 31370471-001-04.
10.2 The guaranteed service period is 12 months.
11.1 In case of a malfunction of the Digital Temperature Spear DT-20, connect with your
supplier.
Manufacturer's address: Tekhnotest-Plus, 12-B ul. Varnenskaia, Odessa, 65065 Ukraine.
Phone: +380487344123. E-mail: admin@ttest-lab.com
Item
DT-20-A2
DT-20-A3
DT-20-G2
DT-20-G3
DT-20-S2
DT-20-S3

9. BATTERY CHANGING

MODULE!!!

10. MANUFACTURER'S WARRANTY

11. CLAIMS
Material
Anodized aluminum,
alloy 6063 Ø16 mm
Anodized aluminum,
alloy 6063 Ø16 mm
Fiberglass Ø10 mm
Fiberglass Ø10 mm
Stainless steel AISI 201
Ø16 mm
Stainless steel AISI 201
Ø16 mm
Versions*
Size, mm
60х60х2000
60х60х3000
60х60х2000
60х60х3000
60х60х2000
60х60х3000
Weight,
kg
0.7
0.9
0.4
0.5
1.5
2.2