Troubleshooting - 70mai Tera 1000 Manual Del Usuario

Troubleshooting

Issue Possible cause
1. The connection between the power cable and the AC
input port or mains socket is poor.
2.
The connection between the car charging cable and
the DC input port or car cigarette lighter is poor.
Power station cannot be
charged
3.
The engine has not been turned on, so there is no
power to the car cigarette lighter.
4.
The connection between the solar panel and the DC
input port is poor.
5.
For AC charging, the power station was not first
turned on.
6. Other causes
1.
The power cable of the electrical device is not
connected to the output port of the power station.
Power station has no
output
2. The DC/AC output switch is not turned on.
3.
Other causes
1. The auto off (no load) function is triggered because of
very low or intermittent output.
Power station output is
2.
The AC/DC OFF timer is set and the AC/DC output turns
interrupted
off when the time expires.
3. Other causes
Note: If an error code is shown, check the online troubleshooting guide to identify the issue and find the corresponding solution.
Solution
Check if the cable or plug is broken or deformed.
Check the connection between the cable and the power station or socket.
Clean away any dust or dirt on the contact points of the socket.
Check if the cable or plug is broken or loose.
Check the connection between the cable and the power station or car
cigarette lighter.
Clean away any dust or dirt on the contact points of the car cigarette lighter.
Start the engine of the car.
Check if the cable or connector is broken or loose.
Ensure that the connection is tight and secure.
Turn on the power station first.
Contact the service center.
Check if the power cable or the port of the electrical device is broken or
deformed.
Ensure that the connection is tight and secure.
Turn on the DC/AC output switch.
Contact the service center.
Disable auto off (no load).
Disable or adjust the AC/DC OFF timer.
Contact the service center.
11