Care And Maintenance - Moni Toys 9328D Instrucciones De Uso

EN
•IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
•THE USER MANUAL CONTAINS IMPORTANT INFORMATION ON THE ASSEMBLY, CORRECT USE AND MAINTENANCE OF THE PRODUCT.
THE DOLL PRAM COMPLIES WITH THE REQUIREMENTS OF EUROPEAN STANDARD EN 71-1-2-3.
•WARNING! THE SHEMES AND FIGURES IN THIS INSTRUCTIONS ARE FOR ILLUSTRATIVE PURPOSE ONLY. THE PRODUCT YOU HAVE
BOUGHT MAY DIFFER FROM THEM.
WARNINGS
WARNING!
1.To be used under the direct supervision of an adult.
2.This toy is not suitable for children under 3 years of age. Small parts.
3.The toy is designed for carrying dolls, not babies, children and pets!
4.Keep away from direct heat sources – heaters, open fires and etc.
5.Risk from suffocation! Remove the package before you give the toy to the child. Children should not be present during the unpacking of the
toy.
6.Risk of choking! During assembly children should not be present. Small parts.
7.Adult assembly required!
8.The folding and unfolding of the trolley must be performed by an adult only.
9.Do not allow your child to play with the trolley close to stairs, doors, heating devices and fire, pools, uneven or sloped surfaces and similar
places which may carry potential risk for injury of your child!
10.Use the trolley at well lit places during the day to avoid accidents.
11.Before you fold trolley and store it, you must remove the moving parts – carry cot, mama bag and luggage basket, if there are such items.
12.Check regularly the condition of each part. In case of damage there is a risk of injuring your child.
13.Accidents may occur if you do not assemble the product correctly. Follow strictly the assembly steps in this manual.
14.The raw materials and dyes used for making this product, are safe for the children's health.
15.The toy is tested according to and complies with the requirements of EU standard EN71.
ASSEMBLY INSTRUCTIONS
The assembly of the toy must be performed in compliance with the exact instructions (Figures 1 to 10). After each operation is
performed, check and make sure that you have followed the instructions properly.
1.Unfold the frame of the trolley. See Figure 1.
2.Attach the push handle to the frame. See Figure 2.
3.Attach the basket stand to the frame. See Frame 3.
4.Attach the doll seat frame to the trolley frame. See Figure 4.
5.Attach the seat fabric to the doll seat frame. See Figure 5.
6.Unfold the basket. See Figure 6.
7.Attach the rear and front parts to the other parts of the basket. See Figure 7.
8.Attach the carry handle to the basket. See Figure 8.
9.Place the assembled basket on its stand on the frame of the trolley. See Figure 9.
10.See Figure 10. This is how the toy will look completely assembled.

CARE AND MAINTENANCE

 Cleaning
1.Clean with soft cloth slightly wetted with water or soft detergent. Wipe dry.
2.You can wash the fabric of the doll seat only by hand with warm water and soft detergent. Leave to dry completely before the next use.
3.Do not use dryer!
4.Do not wash the metal frame and the wheels directly with water.
5.Do not use strong detergents containing abrasive particles or aggressive agents such as acetone, ammonia, bleach or alcohol.
6.Always dry the toy after cleaning. Mold is possible to accumulate, if the product is stored while damp.
 Maintenance
1.Store at a dry and clean place. Do not expose to direct sunlight, rain, humidity or sudden changes of the temperature.
2.Do not store the product near direct heat sources – open fires, heaters or cookers.
3.Regularly check the working order of the individual parts.
4.If you find any damaged or broken parts of the toy or surfaces with cracks, stop its use until the damage is repaired.
4.If there is any damage, contact the shop from which you bought the product. Do not repair by yourselves and do not modify or alter the
product, because this may endanger the safety of your child.
Made for MONI TOYS; Producer: MONI TRADE LTD
Importer: Moni Trade Ltd; Address: Bulgaria, Sofia, Trebich, Dolo str. 1
Tel.: +359 2 / 936 07 90 ; www.moni.bg
5