Battery Empty - Philips HQ9170CC Manual Del Usuario

Battery symbol layout:
,
When the battery is running low, the display shows
a blinking battery symbol and blinking plug symbol
when you switch the shaver off.

Battery empty

To indicate that the battery voltage is too low
,
to operate the appliance, 'LO' appears on the
display.
Recharge the battery. See chapter 'Charging'.
,
Cleaning shaver
When the shaver is due to be cleaned, the tap
,
symbol with blinking water jet appears on the
display.
replacing shaving heads
When the shaving heads need to be replaced
,
(every two years), the shaving unit symbol starts
blinking when you switch the shaver off.
- If you do not replace the shaving heads right away,
the shaving unit symbol remains visible during the
next 7 shaves.
- You can reset the system by pressing the on/off
button for 3 seconds while the shaving unit
symbol is blinking. The shaving unit symbol then
disappears.
- If you have not reset the system after these
7 shaves, the system will automatically reset itself.
Demonstration program
The shaver has a unique demonstration program.
Press the on/off button for 6 seconds.
,
EnglisH