Honeywell AIR GENIUS HFD300 Serie Manual Del Usuario página 8

CONTROLS (CONTINUED)
LEVEL 5 - MAX
Best for power cleaning the air when unpleasant odors are noticeable, your room is particularly dusty, or you
can sense that airborne particles are present. This setting provides the fastest air cleaning of all the settings
and circulates the air frequently in the room.
LEVEL 4 - POLLEN
Best for fighting airborne pollen during high pollen season, particularly in the spring and fall to help reduce
airborne pollen. It is also great for year-round reduction of pet dander allergens.
LEVEL 3 - GENERAL
Best for General Cleaning. Use this setting to help reduce airborne dust and smoke particles, like those from
cooking or tobacco smoke.
LEVEL 2 - QUIET CLEAN
Quietest setting and optimized to capture small particles.
LEVEL 1 - SLEEP
Best for ultra quiet operation, perfect for nighttime use when sleeping.
Oscillate Button – To help circulate fresher, cleaner air through the room, this unit has an oscillation feature.
To turn Oscillation on, simply press the Oscillation button (
Auto-off Timer Button – Push the (
shut-off after a certain amount of time (choose from between 2, 4, 6, 8, 10 and 12 hours). This is convenient
if you would like your air purifier to run during the night and then shut-off automatically in the morning
(choose the 8 or 10 hour setting).
Accent Light Indicator – Your air purifier features a soft accent light at the bottom of the unit that provides a nice
glow around the base. You can choose to operate your unit with or without this accent light turned on. If you
want to use the light feature, you can choose between a low or high light level.
Filter Status and Check Filters Button –The Filter Status "LED light bar" will gradually illuminate to show you
when it is time to check and clean the filters. When all the bars are illuminated and the Check Filter "OK" button
is illuminated, you will need to clean the Permanent, Washable ifD® Filter and clean or replace the pre-filter.
(See Filter Cleaning instructions on pages 9-10). It is recommended that you periodically check the filters.
Depending on operating conditions, the filters should be cleaned every 3 months. If you have chosen to use
the Odor & VOC Reducing
have cleaned or replaced the filters, you will need to RESET the Electronic Filter Check.
To RESET the Electronic Filter Check: After the Permanent, Washable ifD® Filter and Pre-Filter have been cleaned/
replaced and returned to the unit, plug the unit into the power outlet with the unit still in POWER OFF mode, then
press and hold the CHECK FILTER "OK" button for 3 seconds. The Filter Status "LED light bar" will flash twice
and shut off indicating the filter check has been reset. The "OK" button will no longer be illuminated. The cleaning
intervals are intended as guidelines only. Performance of any filter media is dependent upon the concentration of
contaminants going through the system. High concentrations of contaminants such as dust, pet dander and smoke
particles will reduce the useful performance of the filter and they may need to be cleaned more frequently.
) button if you would like your air cleaner to run and then automatically
Pre-Filter, it is NOT washable and should be replaced after 3 months. After you
K
) once. To turn Oscillation off, press the button again.
8