Skil 1735 Manual Original página 7

d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use.
maintained power tools.
Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are less
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
SAFETY INSTRUCTIONS FOR HAMMERS
Wear ear protectors
hearing loss)
Use auxiliary handle(s), if supplied with the tool
Secure the workpiece (a workpiece clamped with
standstill
when original accessories are used
Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
an electrical shock)
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord
Do not work materials containing asbestos (asbestos
is considered carcinogenic)
wear a dust mask and work with a dust
extraction device when connectable
work with a dust extraction device when
connectable
tool
handle G 2 and take a secure stance
making any adjustment or changing any accessory
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
USE
4
With wheel B 2
rotation
! change direction of rotation only when tool is at a
complete standstill
! select operating mode only when tool is switched
off and plug is disconnected
slight pressure on the tool when the drill bit is in
contact with the workpiece
7
wear a dust mask and
always use auxiliary
5
6
7
8
9