Publicidad
2. GENERAL DESCRIPTION
EN
A. On/off button
B. +/- buttons for reducing / increasing the temperature
C. Digital screen
D. Straightening plates
E. Mobile plate
F. Detachable comb
G. Steam outlet
3. BEFORE STARTING TO USE YOUR STRAIGHTENER
OPERATION
1) reservoir :
Removing and filling the reservoir : Do not pour water directly into the reservoir when it is fitted to its base.
Whenever you need to fill the reservoir you must first ensure that the cartridge is correctly in place in the reservoir,
disconnect the reservoir from the base (moving it horizontally), lift the filling cap and fill the reservoir up to its
maximum level.
Reposition the reservoir on its base (moving it horizontally) until you hear the click sound.
IMPORTANT: Do not use any additives in the reservoir
What water should I use?
Your straightener has been designed to function using tap water. Test your water with the hardness paper
supplied with your appliance**. If the hardness exceeds 9°F, use demineralized water that you can get from the
shops.
Never use water which contains additives (starch, perfume, aromatic substances, softeners, etc.),
nor water from batteries or condensation (for example water from clothes dryers, water from refrigerators,
from air conditioning units or rain water).
This is because they contain organic waste or mineral elements which become concentrated under the effect
of heat and cause cracklings, brown colours or the premature ageing of your straightener.
If your water is very hard, we recommend you use a mixture 50 % tap water and 50 % demineralised water
which you can get from the shops.
If the water runs out:
H. Steam cord
I. Base
J. Detachable water reservoir
K. Filling cap
L. Maximum filling level
M. Power cord
CLIC!
12
**
Publicidad
