IKRA THS 500 Pro Instrucciones De Manejo página 21

g) If dust extraction/collection devices are
provided make sure that they are con-
nected and used properly. The use of a
dust extraction device may reduce risks
caused by dust.
4) Use and handling of the power tool
a) Do not overtax the power tool. Use the
power tool intended for your type of work
in each case. The use of the suitable power
tool within the stated range of performance
makes working more effective and safer.
b) Do not use a power tool with a dam-
aged switch. A power tool that cannot be
switched on or off any more is dangerous
and must be repaired.
c) Pull the mains plug and/or remove the
battery before adjusting a tool, changing
accessories or putting the tool aside.
This precaution avoids the unintentional
start of the tool.
d) Store power tools that are currently not
used out of the reach of children. Do not
allow persons to use the tool if they are
not familiar with the tool or these instruc-
tions. Power tools are dangerous if used by
inexperienced persons.
e) Thoroughly maintain your power tool.
Check whether moving parts are working
properly and are not jamming/sticking,
and whether parts are broken or other-
wise damaged in a way that may affect
the function of the power tool. Have
damaged parts repaired before using the
tool. Many accidents are the result of poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Thor-
oughly maintained cutting tools with sharp
cutting edges are jamming less often and
are easier to guide.
g) Use power tools, accessories, add-on
tools, etc. in accordance with these in-
structions and in the way prescribed for
the respective type of tool. You should
also consider the working conditions
and the work to be carried out. The use
of power tools for purposes other than those
intended for the respective tool may result in
dangerous situations.
5) Service
a) Have the power tool serviced by qualified
technical personnel only; repairs should
All manuals and user guides at all-guides.com
Safety instructions for hedge trimmers:
-
-
-
-
• Check the hedge for hidden objects such as
• The hedge trimmer may not be used by per-
• Keep the hedge trimmer away from children,
• Wear suitable clothing. Do not wear loose
• Wear a dust mask if it is dusty where you are
• Do not use the hedge trimmer if the cutter is
• Make sure before switching on the hedge trim-
• When working, keep the cutter away from your
GB-3
be carried out using exclusively original
spare parts. This will ensure the continued
safe operation of the power tool.
Keep all parts of your body away from the
cutting blades. Do not try to remove cut-off
matter with the tool running. Do not try to
hold material to be cut off with your hand.
Remove cut-off matter that is stuck be-
tween the blades only with the tool being
switched off! When working with hedge trim-
mers even a short moment of inattentiveness
may result in severe injury.
Hold the power tool by its insulated han-
dling surfaces as the cutting blades might
get in touch with the tool's own power
cable. If the cutting blades should acciden-
tally cut into a live power cable this might turn
metal parts of the tool 'hot' thereby causing an
electric shock.
Carry the hedge trimmer at the handle with
the cutting blades standing still. Always
put on the protection cover when trans-
porting or storing the hedge trimmer. Care-
ful handling reduces the risk of injury through
the cutting blades.
Keep the cable away from the cutting area.
When working with the trimmer the cable
might be hidden in bushes and accidentally
cut through.
wire fencing before beginning to cut.
sons who are younger than 16 years of age
or by persons who have not been trained to
use it.
other persons and pets.
clothing or jewellery. This could become
caught in moving parts. Wearing rubber gloves
and sturdy footwear is recommended. Wear a
hair net if you have long hair.
working.
not properly secured or if it is damaged.
mer that the blades do not come into contact
with stones or rubble.
body and extremities.