Belkin G Plus MIMO F5D9000 Manual Del Usuario página 19

Installing and Setting up the Card
2B.7
Carefully screw the antenna onto the threaded connector on
the Card. Turn the antenna until it is vertical, pointing up.
2B.8
Replace the computer's cover. Now that the Card is installed,
you can reconnect the power cord and turn the computer back
on.
All manuals and user guides at all-guides.com
2B.9
After reboot, the system will detect
the new hardware. Click "No, not
this time" and "Next" to continue.
2B.10
Depending on your operating system
software, you might see a screen similar
to this one. This DOES NOT mean there
is a problem. Our software has been fully
tested and is compatible with this operating
system. Select "Continue Anyway" and
follow the on-screen instructions.
17 17
1
2
3
4
5
6