OPERATING INSTRUCTIONS
Connect the power cable to a 120V 16A supply which should be located in a
safe, dry area. The switch on the heater is used to control the heater. When the
position is on the ON position the indicator light will turn red and the heater
will be in standby mode. The OFF position will turn off the heater.
● Although the wall heater is waterproof, do not use when raining or in wet
conditions.
● Never connect the power cable from the electrical supply, when the wall
heater is not in use.
THE PANEL CONTROL
● The switch is changed to "I"; the heater is on standby.
● Touch "
" on the panel once for the 1500W for the heater.
● Touch "
" again on the panel and the heater power off.
● Touch the "
", for the timer function to turn on and the heater will turn
off after 2 hours.
REMOTE CONTROL
● Press the "
", to turn on the 1500W heater.
● Press the "
", for the timer function to turn on and the
heater will turn off after 2 hours.
www.newair.com
EN
15