Publicidad
Appearance & Interface Description
1.
Power Switch/ Multi-Function Button
2.
Micro-USB Input
3.
LED Charging Indicator
4.
USB-C Input/ Output Port
5.
Quick Charging 3.0 Port
6.
USB Output Port
Operation Instructions:
Checking the remaining power left in PowerPeak-10 back-up battery
• To view the amount of power left in PowerPeak-10, short press the Multi-Function Button. The LED
Indicator will light up indicating the amount of battery left in PowerPeak-10.
No of LED's Active
% of power remaining
Charging PowerPeak-10 back-up battery
• Connect one end of the Micro-USB Cable to PowerPeak-10 and the other end to a desktop/laptop or
a USB Power Adapter. The Battery Level LED Indicator's will light up indicating that the back-up battery
is charging normally.
Charging USB chargeable devices using PowerPeak-10
• There are 2 USB ports available on PowerPeak-10.
• Use the QC3.0 output port to charge smartphones supporting Quick Charging 3.0.
• Use the 2A port to charge all other Smartphones & Tablets.
• Plug the USB cable into the required USB output port on PowerPeak-10 back-up battery and the other
end into the device. The back-up battery would automatically start charging the connected device.
Note:
Devices that do not support QC 3.0 Charging will be charged at optimum charging capacity when
plugged into the QC3.0 port
All manuals and user guides at all-guides.com
1
<=25%
English
2
3
<=50%
<=75%
1
2
3
4
5
6
4
<=100%
3
Publicidad
