Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2) Mount to the top of helmet.
Thread the nylon velcro strap into curve helmet pedestal, then thread the nylon velcro strap into helmet and
fasten it. Make sure it is fixed firmly. (Picture 1, 2, 3, 4).
Pic. 1
3. Mount handlebar grip
As shown in below pictures, screw the hand-
lebar grip into the camera grip, and mount it
onto the motorcycle or bike.
VI. Insert and take out storage card
1)
Open the camera back cover
2)
Insert the card according to the right direction
3)
Close the back cover
2, Take out the storage card
1)
Turn off the camera power and open the back cover.
2)
Press the end of the storage card slightly, it will eject automatically.
3)
Close the back cover
Notice
a) Please confirm the inserting direction of the SD card because reversed inserting may cause damage to the
camera and the SD card.
Pic. 2
Pic. 1
21
Pic. 3
Pic. 2
Pic. 4
Publicidad
Tabla de contenido
