Video Mode - Phoenix XPLORERCAM HD Manual De Usuario

X. Turn on/off the camera
1. Turn on
Press once " ", key, with one beeping sound camera starts up. On the top of LCD screen it displays the re-
solution icon, remaining recording time of card separately; at the bottom of LCD screen it displays the battery
icon, date and time.
(Remark: when video time mode is set, camera will automatically record after power up).
2. Turn off
Press " "key for 3 secs, it will turn off after one beeping sound.
XI. Video Mode
1. Normal Recording
When the camera is on, set the menu of "video time" to "Close" (refer to "Video Mode" setting), press
once to take video, the recorded time and recording icon are displayed on the top of LCD screen, press "
" key again to stop recording and save the video files, the remaining recording time is displayed on the top of
LCD screen.
(Remark: Camera gives out different sounds between starting recording and stopping recording)
2. Loop recording
(1) Set record overwrite time in the menu of "video time" to 2 or 5 mins (refer to "Video Mode" setting), press
" " key to start recording, when it records to 2 or 5 mins (according to the time you set), the DVR will stop
recording automatically and save the video footage and then continue recording; when SD card is full, DVR
will delete the first video footage automatically and continue recording and so on.
(2) Press key once to stop recording and save the video, the remaining time is displayed on the top of LCD
screen.
(3) The loop recording icon is displayed on the left top of the screen.
23
key