Your Zero Client - Fujitsu Zero Client DZ19-2 Manual De Instrucciones

Your Zero Client...

Your Zero Client...
has a whole range of useful features and functions, e.g.:
• TFT display (Thin Film Transistor; active matrix)
• minimal space requirements because of the slim casing
• LED background lighting
• LAN port 100 MBit Ethernet
• PoE (Power over Ethernet) for Zero Client DZ22-2
• Built-in Zero Client technology for easy access to the Virtual Desktop
• DVI port for second monitor (it is not possible to connect to a PC via this socket)
• 4 USB sockets (for keyboard, mouse and two further USB devices)
• 3.5 mm jack sockets for headphones and microphone
optimum ergonomic characteristics (totally distortion-free, excellent picture
•
definition and colour purity right into the corners)
• high degree of brightness and good contrast
• High resolution - 1280 x 1024 pixels (Zero Client DZ19-2) or 1680 x
1050 pixels (Zero Client DZ22-2)
• display of up to 16.7 million colours
• Automatic scanning of horizontal frequencies from 30 to 82 kHz (Zero Client
DZ22-2) or 31 to 81 kHz (Zero Client DZ19-2) and refresh rates (vertical
frequencies) from 59 to 76 Hz (totally flicker-free)
• digital screen controller with microprocessor for storing 12 different display modes
colour adjustment for matching the screen image to individual viewing usage
•
• convenient operation via integrated OSD (On Screen Display) menu
• VESA-DDC compatibility
• VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device for swivel arm and wall bracket
• Plug & play capability
• ECO function
• Power management for reducing power consumption when the Zero Client is inactive
This operating manual contains the important information that you need for the initial
operation and everyday use of your Zero Client.
Zero Client DZ22-2 is capable of being powered over the LAN. If you use
Power over Ethernet (PoE), you need the corresponding network infrastructure
but no additional power source. Note however that you always need a
power source to operate Zero Client DZ19-2.
To operate the Zero Client you need a LAN connection to a server
with desktop virtualisation software.
The LAN data cable is not included in the delivery. A keyboard and mouse
will also be needed and these can be ordered as options.
Fujitsu Technology Solutions
English - 5
7