Milwaukee T-TEC 201 Instrucciones De Uso página 6

Switching over
drilling
percussion
drilling
Switching
between forward
and reverse
rotation
Changing gear
Bow-type handle
Removing the
bow-type handle
Attaching the
bow-type handle
5
ENGLISH
All manuals and user guides at all-guides.com
Align the lever with the appropriate
symbol:
Drilling: . . . . . . . . . . . . . .
Percussion drilling: . . . .
Place the reversing lever opposite the
respective symbol:
Forward rotation . . . . . . . .
(Drilling / Screwing in)
Reverse rotation: . . . . . . .
(Unscrewing)
Only change direction of rotation when the machine has stopped.
Depress the lock button and turn the gear
lever.
Gear lever in setting 1: 1st gear
Gear lever in setting 2: 2nd gear
The gears can be changed when the
machine is switched off or is running under
no load.
As required, the machine can be used with or without the bow–type
handle.
Operation with bow–type handle: Easier handling when
hammer–drilling or in case of large drill diameters.
Operation without bow–type handle: Due to the shortness of the
machine it is especially suited for working in narrow places. Ideal for
driving–in screws.
Depress the push–button on both sides
and pull off the bow–type handle
downwards.
Insert the bow–type handle from below
into the upper and the lower guide. The
push–button engages automatically.
The machine can be switched on and off
with the push–button in the bow–type
handle.
T-TEC 201