Warranty And Support - Philips SpeedPro Max XC7043/01 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
English
8

Warranty and support

If you need information or support, please visit www.philips.com/support or read the international
warranty leaflet.
Recycling
-
This symbol means that electrical products and batteries shall not be disposed of with normal household
waste (Fig. 3).
-
Follow your country's rules for the separate collection of electrical products and batteries.
Removal of built-in rechargeable battery
The built-in rechargeable battery must only be removed by a qualified professional when the appliance is
discarded. Before removing the battery, make sure that the appliance is disconnected from the wall socket
and that the battery is completely empty.
Take any necessary safety precautions when you handle tools to open the appliance and
when you dispose of the rechargeable battery.
When you handle batteries, make sure that your hands, the product and the batteries are
dry.
To avoid accidental short-circuiting of batteries after removal, do not let battery terminals
come into contact with metal objects (e.g. coins, hairpins, rings). Do not wrap batteries in
aluminum foil. Tape battery terminals or put batteries in a plastic bag before you discard
them.
To remove the rechargeable battery, follow the instructions below.
1 Disconnect the appliance from the wall socket and let it run until the motor stops.
2 Remove the dust container from the appliance (Fig. 4).
3 Undo the three screws that fix the battery holder to the housing of the appliance (Fig. 5).
4 Pull the battery holder out of the appliance (Fig. 6).
Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance. If you are
unable to solve the problem with the information below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Center in your country.
Problem
The appliance does not
work when I push the
button.
Possible cause
When the battery is empty,
'00' flashes on the display.
You have to push the slider
forward to switch on the
appliance.
Solution
To charge the battery, connect the
appliance to the charging base or attach
the handheld vacuum cleaner directly to
the magnet on the charging base.
Push the slider forward to setting 1 to
switch on. Increase the suction power
further by pushing the slider to setting 2 or
select the turbo setting to clean very dirty
patches at the highest suction power.

Publicidad

Tabla de contenido
loading

Tabla de contenido