Specified Use; General Safety Instructions - Metabo PowerMaxx SSD Instrucciones De Manejo

Operating Instructions

1 Specified Use

The cordless impact screwdriver is suitable for
driving in and removing screws.
The user bears sole responsibility for damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.

2 General Safety Instructions

WARNING – To reduce the risk of injury,
user must read instruction manual.
For your own protection and for the
protection of your power tool pay atten-
tion to all parts of the text that are
marked with this symbol!
General Power Tool Safety Warnings
WARNING Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fire and/or serious injury. Save all warnings and
instructions for future reference! The term
"power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of elec-
tric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
All manuals and user guides at all-guides.com
c) Do not expose power tools to rain or wet
d) Do not abuse the cord. Never use the cord
e) When operating a power tool outdoors, use
f) If operating a power tool in a damp location
3) Personal safety
a) Stay alert, watch what you are doing and
b) Use personal protective equipment.
c) Prevent unintentional starting. Ensure the
d) Remove any adjusting key or wrench
e) Do not overreach. Keep proper footing and
f) Dress properly. Do not wear loose clothing
ENGLISH
increased risk of electric shock if your body is
earthed or grounded.
conditions. Water entering a power tool will
increase the risk of electric shock.
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
balance at all times. This enables better
control of the power tool in unexpected
situations.
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
ENG
5