osann BOOBOO Jazzi Manual página 18

EN
Parts list
a) Sports buggy attachment
b) Shoulder pad
c) Guard bar
d) Belt lock
e) Leg support
f) Footrest
g) Front wheel
h) Push handle
i) Sun visor
j) Frame
k) Release button for guard bar
l) Rear wheel
m) Locking lever for front wheel
n) Sports buggy attachment cover
o) Button for removing the sports buggy
attachment
p) Button for adjusting the leg support
q) Button for adjusting the height of the push
handle
r) Lever for adjust the seat position
s) Shopping basket
t) Parking brake
u) Carrycot carrying handle
v) Carrycot
w) Carrycot cover
x) Sun visor
y) Carrycot cover
z) Button for adjusting cover
aa) Carrycot adapter set
ab) Carrycot adapter set (optional, may be
available as an accessory)
1) Unfold the frame
Unfold the frame by pulling the push handle
upwards until you hear a click. Check that the frame
is fully engaged.
2) Mount the front wheels
Insert the front wheels into the front axle until you
hear a click. Check that the front wheels are fully
engaged. To remove the front wheels again, press
the button on the front axle (A) and pull the wheels
out of the axle.
3) Mount the rear wheels
Insert the rear wheels into the rear axle until you
hear a click. Check that the rear wheels are fully
engaged. To remove the rear wheels again, press
the button on the underside of the respective rear
axle (A) and pull the wheels out of the axle.
- 18 -
4) Guard bar for sports buggy attachment
Insert the guard bar into the openings provided on
the sports buggy attachment until you hear a click.
Check that the guard bar is fully engaged. To re-
move the guard bar again, press the button (A) on
both sides of the guard bar and pull it away from
the sports buggy attachment. The guard bar can
only be opened and unfolded on one side to make
it easy to put your child in.
5) Sports buggy attachment
Insert the sports buggy attachment into the de-
signated sockets on the frame until you hear a
click. Check that the sports buggy attachment is
fully engaged. The sports buggy attachment can
be mounted on the frame either in the direction
of travel or facing the pushchair. To dismantle the
attachment again, press the buttons (A) on both
sides of the attachment and pull it off the frame.
6) Assemble the carrycot
First remove the mattress. Open the inner zip of the
carrycot so that you can remove the inner cover.
Push the metal brackets from the inside to the out-
side into the fi xings so that the carrycot opens up.
Check that the metal brackets are fully engaged in
the fi xing points. Reinsert the cover and close the
zip. Put the mattress back in. Model-dependent:
The front sun visor on the cover of the carrycot can
be removed for transport reasons. Reattach it to the
cover using the zip fastener.
7) Sports buggy attachment belt system
The belt system can be individually adjusted at all
shoulder and pelvic straps. There are three height
settings. To adjust the height of the shoulder straps,
place the strap clamp at the back of the sports
buggy attachment crosswise (through the fabric if
necessary) and thread it through to the front. Put the
belt clip back into the desired opening and make
sure it stays fi rmly in place.
8) Front wheel swivel function
You can lock or swivel the front wheels using the
lever on the front wheel.
9) Brake
Operate the brake (A) at the front point (1) to lock it
or at point (2) to release it.