System Temperature Overheat And Fan Failure Management; Visual Status Indicator Definitions; Introduction Of The Stardom Host Adapters - Stardom SOHORAID SR4 Serie Manual De Usuario

Step 3 In RAID 5 mode, when you turn the system on, the hard drive status indicator of the
English
replacement drive will interchangeably blink red and purple to inform that the data is
being rebuilt to the replacement drive. During data rebuild, you may operate the SR4-
Deutsch
WBS3 as normal. When the indicator stops, the data rebuild process has been
completed.
In RAID 0 mode, since all data have been destroyed or lost due to hard drive malfuntion,
Français
you are required to re-format the drives for use.
Español

7. System Temperature Overheat and Fan Failure Management

中文
If the alarm indicator has lit up red and the audio alarm sounds, this could mean that either a
system fan has stopped operating entirely or the system temperature has exceeded over the
日本語
default temperature of 60°C. When this occurs, you may press the mute button at the rear of
the system to shut off the audio alarm and power off the system immediately if in the allowed
한국어
operational state to let the system cool. Check and see if the overall operation environment is
well ventilated and make sure there are no blockages to the enclosed fan and then re-power
on the system to continue use. If the problem persists, please turn off the system and contact
your supplier or the STARDOM tech support for further assistance.
8. Visual Status Indicator Definitions
Hard drive status indicator :
1. The front hard drive status indicator lights up in blue, the hard drive is on standby.
2. The front hard drive status indicator lights up in red, the hard drive is missing or
malfunctioning.
3. The front hard drive status indicator blinks in blue, the hard drive is reading/writing data.
4. The front hard drive status indicator blinks in purple, data rebuild is in progress.
5. The front hard drive status indicator of newly installed hard drive blinks in red and purple
interchangeably, data rebuild is in progress.
6. The front hard drive status indicator blinks in red and blue, system initialization is processing.
Power indicator:
1. When the power indicator lights in blue, this means the power of the system is on.
2. When the power indicator is off, this means the power of the system is off.
Alarm indicator:
1. The alarm indicator will light up in red if the system temperature exceeds the safety limitation,
the cooling fan fails or the hard drive has not been installed or has failed.
2. When the alarm indicator is off, the system temperature, cooling fan and hard drives are
in the normal state.

9. Introduction of the STARDOM Host Adapters

If you require an host adapter to be used with this system, please log onto www.stardom.
com.tw to find the recommeded adapter or contact STARDOM for more information.
10
SOHORAID SR4 Series User Manual