Replacement Of Malfunctioning Drive And Data Rebuild Instructions - Stardom SOHORAID SR4 Serie Manual De Usuario

More than one HD in the RAID fail. This screen indicates that damage has occurred to this
disc. Please reconstruct your RAID.
Detailed descriptions of different messages under Error Statistics are as below:
Persistent : Please check if errors are repeated in the array to recover the failure.
Recoverable : Please check if recovered errors could be found in the array.
ABORT Success, COMREST Success, FET Success : The initialization and reset procedures
executed by SR4 on HD during power startup.
ABORT Success
-Next

6. Replacement of Malfunctioning Drive and Data Rebuild Instructions

When a front hard drive indicator has lit up red and the audio alarm sounds, this could mean
the indicated hard drive may be malfunctioning. If this occurs, you may press the mute button
at the rear of the system to shut off the audio alarm and power off the system immediately if
in the allowed operational state, and then re-power on the system to double check and see if
in fact the indicated hard drive has malfunctioned. If the problem persists, please turn off the
system and follow the directions below :
Step 1 Remove the drive tray containing the malfunctioned hard drive and disassemble
the hard drive from drive tray.
Step 2 Mount the new hard drive onto the tray and insert it back to the empty drive position
of the SR4-WBS3, then push the latch into place making sure it is secured and locked.
--HALTED--
RAID Invalid
Error Statistics
-Next
Persistent
-Next
Recoverable
-Next
COMREST Success
Go- -Next
SOHORAID SR4 Series User Manual
Go-
Go-
Go-
FET Success
Go- -Quit
English
Deutsch
Français
Español
中文
日本語
한국어
Go-
9