LG DF22BV2BR Manual Del Propietário página 53

Problem
Fabric softener is not used or
used incorrectly.
Clothes dried too long
Excess static in
clothes after drying (overdried).
Drying synthetics, permanent
press, or synthetic blends.
Clothes have Very large load or very small
damp spots after a load.Single large item such as
Sensor Dry cycle. a blanket or comforter.
The password for the Wi-
Fi network was entered
incorrectly.
Mobile data for your
smartphone is turned on.
The wireless network name
Trouble connecting (SSID) is set incorrectly.
appliance and
smartphone to Wi-
Fi network
The router frequency is not 2.4
GHz.
The appliance is too far from
the router.
Possible Cause
• Use a fabric softener or the Reducir Estática(Reduce
• Overdrying a load of laundry can cause a buildup of
• These fabrics are naturally more prone to static buildup.
• If items are too tightly packed or too sparse the sensor
• Large, bulky items such as blankets or comforters can
• To dry a few remaining damp items from a very large
• Delete your home Wi-Fi network and begin the
• Turn off the Mobile data on your smartphone before
• The wireless network name (SSID) should be a
• Only a 2.4 GHz router frequency is supported. Set the
• If the appliance is too far from the router, the signal
Solutions
Static) option, if equipped, to reduce static electricity.
Be sure to follow the manufacturer's instructions.
static electricity. Adjust settings and use a shorter
drying time, or use SECADO MANUAL(MANUAL DRY)
cycles. Select a Menos Seco setting on SENSOR DE
SECADO(SENSOR DRY) cycles, if necessary.
Try using fabric softener, or use LESS DRY and/or
shorter Tiempo de Secado(TIME DRY) time settings.
may have trouble reading the dryness level of the load.
Use a Tiempo de Secado(TIME DRY) cycle for very
small loads.
sometimes wrap themselves into a tight ball of fabric.
The outside layers will dry and register on the sensors,
while the inner core remains damp. When drying a
single bulky item, it may help to pause the cycle once
or twice and rearrange the item to unwrap and expose
any damp areas.
load or a few damp spots on a large item after a sensor
cycle has completed, empty the lint trap, then set a
Tiempo de Secado(TIME DRY) cycle to finish drying
the item(s).
registration process again.
registering the appliance.
combination of English letters and numbers. (Do not
use special characters.)
wireless router to 2.4 GHz and connect the appliance
to the wireless router. To check the router frequency,
check with your Internet service provider or the router
manufacturer.
may be weak and the connection may not be
configured correctly. Move the router closer to the
appliance or purchase and install a Wi-Fi repeater.
MAINTENANCE 51