Indicated that the Reader is connected to an AC outlet or to a computer via USB. The battery
is being charged. It goes off when charging is complete.
15. Power on switch and key lock
16. Reset button
Resets the Reader if no operation is possible. The Reset button is located on the backside of
the Reader.
Turning on/off the Reader
Slide and hold the Power switch for 2 seconds to turn on the Reader. Make sure to turn on the
Reader before connecting to your computer.
Slide and hold the Power switch again to turn off the Reader.
Notes
When turning on the Reading the Reader starts to scan all books in the Reader. Depending
on the total number of books stored on the internal flash memory and external Micro SD (TF)
card, the scanning process can take several minutes. The scanning process is necessary for
the sorting operations and displaying the book cover in the book list.
The scanning operation starts automatically in the following cases:
−
After switching on the device;
−
An external Micro SD (TF) card has been removed or inserted;
−
A book of supported formats has been downloaded and you exit the browse.
−
After disconnecting the Reader from the USB port of a computer.
Power Management of the Reader
The Reader has a Power Management feature to avoid unnecessary battery consumption. At
purchase, the Power Management is activated. The Power Management operates as follows:
After 15 minutes of inactivity, the Reader switches off itself automatically. You can
activate/deactivate the Power Management from the "Power Management" option in the
"Settings" menu.
Suspend and Wake up Mode
In order to save energy, the Reader goes to the "sleep" (suspend mode) after 3 seconds inactivity
of keyboard or touch screen. Press any key to reactivate (wake up) the Reader again.
Hint:
Tapping on the touch screen does not reactive the Reader.
Charging the Reader
You need to charge the Reader when using it for the first time, or when the remaining battery
53 / 142