Notes On Memory Cards; On Cleaning - Leotec E-INK Manual De Usuario

the Reader.
Notes on memory cards
About Micro SD (TF) Memory Card
Micro SD (TF) Card complies with compact memory card standard and is commonly used as a
storage media for digital still cameras.
Notes on handling memory cards
The Reader does not comply with the following:
− MagicGate standard.
− Copyright protection of Micro SD (TF) Memory Cards.
Keep a memory card in its case when you carry or store it.
Do not touch the connector of a memory card with bear hands or metallic objects.
Do not bend, drop, or subject a memory card to excessive shock.
Do not disassemble or modify a memory card.
Do not allow a memory card to get wet.
Avoid the following to prevent data damage. Your dealer does not provide any guarantee for
damaged data.
− Remove a memory card or turn off the Reader while reading or writing data.
− Operate the Reader in the location where static charge or electrical noise is present.
Do not use a label other than the dedicated one in the label area.
Do not use or store the Reader in a location subject:
− Extreme high temperature, such as in a sun‐heated car.
− Direct sunlight.
− High humidity or places with corrosive substances.
On Cleaning
Clean the case of the Reader with a soft cloth, such as a cleaning cloth for eyeglasses.
If the case of the Reader becomes very dirty, clean it with a soft cloth slightly moistened with
water or a mild detergent solution.
Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzene,
as it may mar the finish of the case.
Be careful not to let water get into the Reader.
Clean the headphone plug periodically.
Tapping or dragging on the touch screen using a dirty stylus may damage the surface. Wipe
the stylus with a dry cloth when it gets dirty.
93 / 142