Uline H-6745 Instrucciones De Montaje página 3

Figure 1
2
Figure 2
4
4
5
Figure 3
PAGE 3 OF 12
Bottom End of Locker
5
4
4
4
2
ASSEMBLY
NOTE: Do not tighten bolts until unit is
completely assembled.
1. Place back (1) on a protected flat surface so that
the flanges face upward.
2. Bolt side (2) to back (1) so that side flange fits
around back (use 8 bolts and nuts - nuts to the
inside). Do not use bottom two holes; these will be
used for attaching legs in step 5. (See Figure 1)
1
3. Next, bolt top and bottom (5) to back and left side
panel (use 4 bolts and nuts each). Bolt shelves (4) to
left side panel. (See Figure 2)
4. Bolt right side (2) to the back so that side flange
fits around back. Attach side to top, bottom and
shelves. (See Figure 3)
0321 IH-6745