JB Systems Light RADIANT LASER Manual De Instrucciones página 6

ENGLISH
 Press the UP/DOWN buttons to select the desiRed DMX-mode. (1Ch or 10c)
 Press the ENTER-button to confirm your choice.
 Press the FUNC-button: the 3 digit number on the display starts blinking.
 Select the desiRed DMX-address
 Press the ENTER-button to confirm your choice.
Note: the display blinks when the unit is in DMX-mode and no DMX-signal is detected.
Some more information on DMX512:
The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
"daisy chain" your DMX controller and all the connected light effects with a good quality XLR M/F balanced
cable. To prevent strange behavior of the light effects, due to interferences, you must
use a 90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables,
this simply won't work!
Each effect in the chain needs to have its proper starting address so it knows which
commands from the controller it has to decode.
1 CHANNEL DMX-CONFIGURATION OF THE LASER:
CHANNEL VALUE
000-024 Laser OFF (Black out)
025-059 AUd mode (Auto grating effects show)
060-099 AUP mode (Auto pattern effects show)
CH 1
100-139 AUn mode (Auto grating + pattern effects show)
MODES
140-179 Sod mode (Sound active grating effects show)
180-219 SoP mode (Sound active pattern effects show)
220-255 Son mode (Sound active grating / pattern effects show)
10 CHANNEL DMX-CONFIGURATION OF THE LASER:
IMPORTANT REMARK: DMX Channel1 is used to set the different working modes of the laser.
 To use the laser in full 10 channel mode, channel 1 must be set to value 175 or higher.
 Depending on the DMX-values of channel1, 3 different charts can be applied:
 Value between 175 and 199: see chart "10CH DMX-chart 10-A"
 Value between 200 and 224: see chart "10CH DMX-chart 10-B"
 Value between 225 and 255: see chart "10CH DMX-chart 10-C"
CHANNEL VALUE
000-024 Laser OFF (Black out)
025-049 AUn mode (Auto grating + pattern effects show)
CH 1
050-074 Son mode (Sound active grating / pattern effects show)
MODES
075-099 AUP mode (Auto pattern effects show)
100-124 SoP mode (Sound active pattern effects show)
125-149 AUd mode (Auto grating effects show)
JB SYSTEMS
®
USER MANUAL
DESCRIPTION
DESCRIPTION
7/66 RADIANT LASER
ENGLISH
150-174 Sod mode (Sound active grating effects show)
DMX mode with GRATING DOT effects
175-199
 see 10CH DMX-table 10-A
DMX mode with GRATING PATTERN effects
200-224
 see 10CH DMX-table 10-B
DMX mode with traditional pattern effects
225-255
 see 10CH DMX-table 10-C
10CH DMX-chart 10-A (DMX CHANNEL1 set between values 175 and 199)
CHANNEL VALUE
000-127 128 different fixed positions on X-axis
CH 2
128-191 Clockwise moving
X AXIS MOVING
192-255 Anticlockwise moving
000-127 128 different fixed positions on Y-axis
CH 3
128-191 Clockwise moving
Y AXIS MOVING
192-255 Anticlockwise moving
000-009 Laser blackout
010-063 Blue + green ON or Blue & green strobing
CH 4
064-127 Blue ON or Blue strobe & green OFF
COLORS
128-191 Green ON or green strobe & Blue OFF
192-255 Blue + green ON or Blue & green strobing alternately
000-009 No Strobing
CH 5
010-249 Strobing (low to high speed)
STROBE
250-255 Strobing to the music
CH 6
000-075 Clockwise rotation (low to high speed)
GRATING
076-150 No rotation
ROTATION
151-255 Anticlockwise rotation (low to high speed)
CH7  CH10
NOT USED
10CH DMX-chart 10-B (DMX CHANNEL1 set between values 200 and 224)
CHANNEL VALUE
CH 2
000-255 11 different grating patterns
000-127 Pattern size: from big (100%) to small (5%)
CH 3
128-169 Zooming in (from big to small + from slow to fast)
ZOOMING
170-209 Zooming out (from small to big + from slow to fast)
210-255 Zooming in & out (from slow to fast)
000-127 0° to 359° fixed positions around Y axis
CH 4
Y AXIS
128-191 Clockwise rolling around Y axis
ROLLING
192-255 Anticlockwise rolling around Y axis
000-127 0° to 359° fixed positions around X axis
CH 5
X AXIS
128-191 Clockwise rolling around X axis
ROLLING
192-255 Anticlockwise rolling around X axis
000-127 0° to 359° fixed positions around Z axis
CH 6
Z AXIS
128-191 Clockwise rolling around Z axis
ROLLING
192-255 Anticlockwise rolling around Z axis
000-127 128 different fixed positions along the X axis
CH 7
128-191 Clockwise moving along the X axis
X AXIS MOVING
192-255 Anticlockwise moving along the X axis
JB SYSTEMS
®
USER MANUAL
DESCRIPTION
DESCRIPTION
8/66 RADIANT LASER