Palmer Peoct Manual De Usuario página 6

switches ABCD are assigned to the higher 4 loops (L5 – L8). Press the
switches "B" and "D" to activate the loops L6 and L8.
6) Press the red "STORE" button to store the configuration. It is now
stored under Bank 1, Preset A.
Continue with the above procedure to program further presets.
NOTES
- Although you do not need to connect all 8 Loop sends and returns for
the Octobus to operate, when saving a preset with a loop that has no
pedal inserted there will be no output. Either edit the preset to remove
the unused loop or insert an effect.
- The presets remain stored even if the power is removed
- The Octobus does not come with integrated effects.
- The Octobus does not provide power for the effects. Batteries or power
supplies must be used to power the effects.
6