Troubleshooting; Blade Life; Battery Life - Panasonic ER-GB96 Instrucciones De Funcionamiento

Troubleshooting

Problem
The appliance has
become blunt.
The operating time is
short.
The appliance stopped
working.
The appliance cannot
be charged.
ER-GB96中南美 v10.indb 15
Action
Until problems are solved, please
follow each procedure as follows:
1. Charge the appliance.
(See page 9.)
2. Clean the blade and apply oil.
(See pages 13 and 14.)
3. Replace the blade.
(See page 14.)
4. Have the battery replaced by an
authorized service centre.
Charge the battery for
approximately 8 hours
continuously to rejuvenate it.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.)
Contact an authorized service
centre for repair.
Insert the appliance plug into the
main body firmly and make sure
the charge status lamp glows.
Charge within the recommended
charging temperature of 0 °C
(32 °F) to 35 °C (95 °F).
Problem
Apply oil.
(See page 14.)
Makes a loud sound.
Confirm that the blade is properly
attached.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service centre authorized by
Panasonic for repair.

Blade life

Blade life varies according to the frequency and period of use
of the appliance.
For example, the blade life is approximately 3 years when
using the appliance for 5 minutes 10 times a month. Replace
the blades if cutting efficiency reduces substantially despite
proper maintenance.

Battery life

Battery life will vary according to the frequency and length of
use. If the battery is charged once a month, the service life will
be approximately 3 years.
If the operating time is significantly shorter even after a full
charge, the battery has reached the end of its life.
Action
15
18/5/9 上午8:56