Parts identification
g
a
j
h
i
b
c
d
e
f
A
Main body
a Water inlet
b Trimming height
indication mark
c Dial (Height adjustment
control)
d Power switch
e Charge status lamp
f Appliance socket
B
Blade
g Cleaning lever
h Moving blade
i Stationary blade
j Mounting hook
Comb attachment [
C
(1 mm (1/32˝ ) to 10 mm
(13/32˝ ))
Comb attachment [
D
(11 mm (7/16˝ ) to 20 mm
(51/64˝ ))
ER-GB96中南美 v10.indb 9
k
l
m
n
H
J
Comb attachment [
E
(21 mm (53/64˝ ) to 30
mm (13/16˝ ))
F
Detail trimming
attachment
G
AC adaptor (RE9-86)
(The shape of the
power plug differs
depending on the area.)
k Adaptor
l Power plug
m Cord
n Appliance plug
Accessories
]
H
Cleaning brush
I
Oil
J
Travel pouch
]
Charging
Turn the appliance off.
1
Connect the appliance plug to
the appliance socket.
2
Plug in the adaptor into a
household outlet.
• Check that the charge status lamp
glows.
• Charging is completed after approx.
1 hour.
3
]
Disconnect the adaptor when the charge status
C
lamp stops glowing.
(for safety and to reduce energy usage)
<To check if charging is completed>
• If you remove and reinsert the appliance plug while
charging, the charge status lamp glows and turns off
after approximately 5 seconds.
Notes
• To keep charging the battery will not affect battery
performance.
• If there is noise from the radio or other sources while
using or charging the product, move to a different
location to use the product.
• When the appliance is not used for 6 months or more,
the battery will weaken (leak battery fluid, etc.). Fully
charge the battery once every 6 months.
• You can charge the battery before it is completely
discharged. However, it is recommended to charge
when the battery is completely discharged. The battery
life depends strongly on factors such as how it is used
and stored.
2
1
9
18/5/9 上午8:56