Descargar Imprimir esta página

Kinderkraft YUMMY Manual De Usuario página 15

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
vicinity of the product.
• Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
• Always check the security and the stability of product before use.
• Make sure that any harness is correctly fitted.
Do not move or lift the product while the child is inside.
Do not use the product until the child can sit up unaided. Keep children away when assembling and
disassembling the product to avoid injury. High chair is intended for children able to sit
up unaided and up to 3 years or a maximum weight of 15 kg.
Don't use the product if any part is broken, torn or missing.
Product located under a window could be used as a step by the child and cause the
child to fall out of the window.
Accessories or replacement parts other than those approved by the manufacturer
must not be used.
A. Main parts
1.
Seat
2.
Lower legs:
1.
2.
3.
Upper legs:
1.
2.
4.
Two-piece tray
5.
Cover with safety harness
6.
Button for folding/unfolding legs of the chair
7.
Button for seat height adjustment
8.
Additional footrest
B. Assembly of legs
Before assembling ends of the tubes, remove the plastic caps. Press the button (6) and unfold right and left
leg (3.1, 3.2). Place the left leg of the chair (3.1) in the side opening of the seat (1). Insert the leg until number
"1" appears in the side window. Repeat the procedure with the right leg (3.2). As a result, you should obtain
the structure shown in Fig. B2. Fix leg 2.1 at the rear, and leg 2.2 in the front of the chair (Fig. B3). WARNING:
The rear leg is equipped with wheels, preventing mistakes during the assembly process. The lower legs are
fitted correctly, when they are secured by spring-mounted pins
C. Attaching / removing the upholstery
Insert the top of the upholstery onto the back of the seat. Attach the sides of the pouch, wrapping it around
the arm support and securing hooks on each side of the seat (Fig. C).
In order to remove the shell, pull out all the belts (see section D) and unhook the hooks on each side of the
seat.
WARNING: Never use the product without upholstery.
D. Use of adjustable safety harness
WARNING: Use of safety harness is essential for the safety of your child. Using the tray does not ensure
proper child support. Always use safety harness.
Belts of safety harness can be adjusted and mounted in three positions depending on the height of the child.
Fastening belts of the safety harness to the product:
Put the plastic ring of the belts through the opening in the cover and in the seat (Fig. D2), without locking it
inside (Fig. D3). Repeat this procedure for all the belts. Connect shoulder, hip and crotch belt in the buckle.
Correct fastening of the belts of safety harness is shown in Fig. D1.
Disassembly of safety harness.
To completely remove the safety harness, proceed in the reverse order to the procedure described above.
Rear
Front
Left
Right
15

Publicidad

loading