Turning On And Off; Switching To Standby Mode - Miracle-Ear MEENERGY R AX T 5 Manual Del Operador

CAUTION
Risk of injury!
In very rare cases the ear piece could remain
X
in your ear when removing the hearing aid. If
this happens, have the ear piece removed by a
medical professional.
Clean and dry your hearing aids after usage. Read
more in section "Maintenance and care".

Turning on and off

You have the following options to turn your hearing
aids on or off.
Via charger:
Turning on: Take the hearing aids out of the charger.
X
The startup melody is played in your hearing aids.
The default volume and hearing program are set.
Turning off: Place the hearing aids in the charger.
X
Note that the charger must be connected to the power
supply. For details refer to the charger's user manual.
16
Via rocker switch:
Turning on: Press and hold the
X
lower part of the rocker switch until
the startup melody starts to play.
Release the rocker switch while the
melody is playing.
The default volume and hearing
program are set.
Turning off: Press and hold upper
X
or lower part of the rocker switch
for several seconds. A power down
melody is played.

Switching to standby mode

Via remote control or smartphone app, you can switch
your hearing aids to standby mode. This mutes the
hearing aids. When you leave standby mode, the
previously used volume and hearing program are set.
Note:
●
In standby mode, the hearing aids are not turned off
completely. They draw some power.
Therefore we recommend to use standby mode
only for a short period of time.
17