5
RD107
Chiming indicator
Hour hand
Minute repeater pusher
All or nothing indicator
Setting the Watch
Minute hand
Crown
Function indicator
Flying tourbillon
Winding the Watch
you will hear 3 different chimes
in 2 pitches sounding the hours,
Your watch is automatically
quarter-hours and minutes
wound by your wrist movements.
respectively.
Important: The first time you
Recommendation of use
wear your watch and whenever it
has stopped, we recommend
Do not use the Minute Repeater
manually winding by turning the
function while setting the time or
crown clockwise in position 1
when the crown is in position 2.
approximately 45 times.
Do not activate the minute
When winding, the function
repeater pusher if the chiming is
indicator at 3 o'clock must show
in progress.
"winding".
Do not set the time counter
Setting the time
clockwise before using the
minute repeater function.
Pull out the crown to position 2.
The function indicator at 3
Wait 30 seconds after the last
o'clock will show "setting".
ring to activate either the minute
repeater again or to set the time.
Turn the crown clockwise to set
the time.
Any of the actions listed above
will damage the mechanism.
Once the change has been made,
push the crown back into position 1.
The minute repeater function
The function indicator at 3 o'clock
works with an «all or nothing»
will then show "winding".
mechanism. When using the
minute repeater pusher, push
Using the minute repeater
until the "All or nothing"
function
indicator at 9 o'clock goes until
the end of its run, i.e. the arrow to
Use the minute repeater pusher
the furthest right. If the minute
to activate the eponym function.
repeater is not pushed enough,
When you release the pusher,
the minute repeater mechanism
will not chime.
6