Adjusting The Picture Brightness; Adjusting The Contrast; Changing Or Adjusting The Color Temperature - Sony CPD-M151 Manual De Instrucciones

Customizing Your Monitor
For vertical adjustment, select V using the ˘/≥
buttons and adjust the position using the +/–
buttons.
+ . . . to move the picture up
– . . . to move the picture down
5
When you have finished, click [END] on the screen to
turn off the test pattern.
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.

Adjusting the Picture Brightness

Once the brightness is adjusted, it will be stored in memory
for all input signals received.
1
Press the ¨ (brightness) ˘ button.
The BRIGHTNESS OSD appears.
2
Press the +/– buttons.
+ . . . for more brightness
– . . . for less brightness
The OSD automatically disappears after about 3 seconds.
* The horizontal and vertical frequencies for the received input
signal appear in the BRIGHTNESS OSD.
If the screen is too bright when using the monitor in a
dark room
Decrease the BACKLIGHT (page 16).
14
CENTER
H
V
26
BRIGHTNESS
26
48. 4kHz / 60Hz
Horizontal Vertical
Frequency* Frequency*

Adjusting the Contrast

Once the contrast is adjusted, it will be stored in memory for
all input signals received.
1
Press the > (contrast) ≥ button.
The CONTRAST OSD appears.
2
Press the +/– buttons.
+. . . for more contrast
– . . . for less contrast
The OSD automatically disappears after about 3 seconds.
* The horizontal and vertical frequencies for the received input
signal appear in the CONTRAST OSD.
Changing or Adjusting the Color
Temperature
The color temperature is set to 9300K at the factory.
You can change the color temperature to 6500K or 5000K.
Use this function to adjust the color temperature so that it
matches the actual colors of a printed picture.
Once the color temperature is adjusted, it will be stored in
memory for all input signals received.
1
Press the MENU button.
The MENU OSD appears.
MENU
CONTRAST
26
48. 4kHz / 60Hz
Horizontal Vertical
Frequency* Frequency*
MENU OK MENU
EXIT
PHASE
PITCH
CENTER
COLOR
LANGUAGE
OPTION