Amprobe TMD-53 Manual De Uso página 12

All manuals and user guides at all-guides.com
The " " key turns the thermometer on or off. In the SET
mode cannot be powered off. Exit SET mode to power
off.
APO function mode
Press " " power key for more than 4 seconds to disable
the auto-power function.
The display will show " ".
on, it is set to the temperature scale that was in use
when the thermometer was last turned off. To change
" key.
Press this key to enter the Data Hold mode, the " "
annunciator is displayed. When HOLD mode is selected,
the thermometer holds the present readings and stops
all further measurements. Press the " " key again to
cancel HOLD mode and resume measurements. In the
MAX/MIN recording mode, press " " key to stop the
recording. Press " " key again to resume recording.
(Previously recorded readings are not erased).
Backlight function mode
Press the " " key for more than two seconds to turn
on the backlight. Press the key again for more than two
seconds to turn off the backlight. The backlight will
switch-off automatically after 30 seconds.
The input selection indicates which input is selected
for main display; T1 thermocouple, T2 thermocouple or
5