Switching Off The Device; Taring Weight Display (Tare) - Seca 764 Manual De Instrucciones Y Garantía

– To switch off the scales, press the
Start button again.

Switching off the device

– To switch off the scales, press the Start button again.

Taring weight display (TARE)

The TARE function is useful if an additional weight should not be considered while
weighing.
Proceed as follows:
– Press the green Start button.
– First, place the additional weight onto
the scales and activate the TARE
function by pressing down and briefly
holding down the HOLD/TARE but-
ton.
The display is reset to zero.
pears in the display "NET" appears in
the display.
– Now place the patient onto the scales
with the previously weighed additional
weight.
The scales show the weight of the pa-
tient without the additional weight.
You can now perform as many weigh-
ing operations as you like.
– Deactivate the TARE function by
pressing the button down and holding
it briefly once again; this puts the
scales back into the normal weighing
mode, the tare value (the additional
weight value) is deleted.
– The tare value is likewise erased
when the scales are switched off.
Model 764
ap-
23