Troubleshooting; Care And Maintenance - Deco Breeze DBF0247 Manual Del Usuario

OPERATION INSTRUCTIONS
• The speed control knob (H) is located on the top rear
of fan motor assembly (J). Position 0 = off,
position I = low speed, position II = medium speed
and position III = high speed. Simply twist switch to
desired position to operate.
• The fan can operate in stationary or oscillation mode.
The oscillation knob (I) is located on the top rear of
fan motor assembly (J). To engage the oscillation function,
simply depress the button. To stop, pull up.
• The fan features a telescoping upper pole (X). To set
at the desired height, simply loosen and then tighten the
Height adustment knob (W).
• The fan head can also tilt slightly for added adjustment.
Loosen tilt adjustment knob (K) and pitch the fan head to
the desired angle and then retighten.

TROUBLESHOOTING

If you have any questions regarding the product, please call customer service at 1-800-979-4326,
8 a.m. - 5 p.m., PST, Monday - Friday. Do not attempt to repair or modify any mechanical or electrical
parts of this fan. Doing so may void the warranty.
PROBLEM
The fan will not operate.
The fan will not oscillate.

CARE AND MAINTENANCE

• Always unplug the appliance from the power supply before servicing.
• Clean parts with a duster, soft cloth or compressed air cannister (similar to computer cleaners).
Warning: Do not use cleaning solutions or abrasive material as it may damage the finish or
components of the fan.
All manuals and user guides at all-guides.com
CORRECTIVE ACTION
Confirm that the fan switch is not in the OFF position.
Confirm the plug connectors are perfectly joined.
Push down on knob on top of motor housing to activate oscillation.
9
Page 8
J
I
H