Installation Kit; Installation Steps - Honeywell MM14CCSBB Manual Del Propietário

INSTALLATION

Installation Kit:

1. Window Bracket Kit.............................
2. Window Bracket Panel Adapter...........
3. Plastic Pin............................................
4. Hose Connector..................................
5. Plastic Hose........................................

Installation Steps:

1. Install the plastic hose with window bracket adapter and hose connector on both sides.
Ensure proper fit on both ends.
2. Adjust the window bracket as per width or height of your window and insert the plastic pins to fix at
the desired position. There is a hole where the Plastic Hose will be inserted later. Make sure this hole
is not blocked.
Plastic Pin Plastic Pin
3. Connect the plastic hose to the hose
connector on back of the unit. Push-in until it
is locked in place.
4. Connect the window bracket to the opposite Connect the window bracket to the opposite
end of the plastic hose. Ensure that all
connections are tight and installed properly.
All manuals and user guides at all-guides.com
1 Set
1 Piece
2 Pieces
1 Piece
1 Piece
Note:
Do not install the window bracket to your window. This
step is required only to adjust it to the size of your
window. The bracket should be removed from the
window after the size is adjusted.
Hole for Plastic Hose
EN
1 2
x 1
5
x 1
5. Connect the window bracket to the window.
6. The Portable Air Conditioner is now ready to
use.
3
3 4
x 2 x 1
x 1