Switching The System On; Tuning To Radio Stations - Proline NC130 Manual De Instrucciones

All manuals and user guides at all-guides.com

SWITCHING THE SYSTEM ON

There are two ways to power on the system.
to a wall outlet
To use the player with batteries
1. Remove the battery compartment cover at the bottom of the unit.
2. Insert 6 size C batteries
compartment.
3. Replace the battery compartment cover.
To use the player by connecting the AC power cord
Insert one end of the supplied AC power cord into the AC socket located at the rear of the unit
and the other end into the wall socket.
Pull the mains plug out of the wall socket if you want to switch off the unit completely.

TUNING TO RADIO STATIONS

1. Set the function selector to RADIO. The power LED indicator will come on.
2. Set the band selector to the desired waveband: AM, FM or FM ST. (STEREO).
3. Turn the TUNING control on one side to tune in to a radio station.
When FM ST. is selected, the FM stereo indicator on the front panel will come on to
show FM ST. mode.
4. Turn the VOLUME control to set the desired listening level.
5. To turn off the radio function, move the function selector to OFF.
FOR BETTER RECEPTION
FM - This appliance has a FM antenna located on the top of the unit.
Fully extend the antenna for better reception.
to AC IN
observing the proper polarity (+/-) as indicated inside the battery
E5
Insert 6 x "C" size batteries
into the battery compartment