1-3/16" Hex Head Screw - Sauder Whisker Manual Del Usuario

STEP 16
å Fasten the BRACES (X) to the BOTTOM (C). Tighten six
1-3/16" HEX HEAD SCREWS (17) using the L-WRENCH (6).
NOTE: You should start each SCREW a few turns before
å
completely tightening any of them.
whiskersupport.com
X
C
X
6
429610
X
17

1-3/16" HEX HEAD SCREW

(6 used in this step)
Page 21