Reset To Factory Default Settings - Medisana 52345 Instrucciones De Manejo

9.1 Resetting the device with the reset button
Make sure, that the SBM is connected to the mains. Use a ball-pen or similar and
guide it through the opening of the reset-button
(see page III, point
The status indicator
You have successfully reset the SBM to the factory default settings.
9.2 Resetting the device via web-interface:
Access the web-interface as descibed in chapter 5 resp. 6. Navigate to Maintain -> Fac-
tory Settings (see chapter 7.14 Maintain - Factory Settings). Confirm the reset and wait
for the SBM to reboot.

9 Reset to factory default settings


). Press and hold the button for more than 10 seconds.

goes off. When you release the button, the SBM will reboot.

:

on the bottom side of the device
GB
G
29
GB