Transport; Storage; Care And Maintenance; Troubleshooting - Kärcher K 2 Basic Manual De Instrucciones

 Turn off tap.
 Press the lever on the trigger gun to release any re-
maining pressure in the system.
 Lock the lever on the trigger gun.
 Detach the appliance from the water supply.

Transport

CAUTION
Risk of personal injury or damage!
Mind the weight of the appliance during transport.
When transporting by hand
 Lift appliance by the carrying handle and carry it.
When transporting in vehicles
 Secure the appliance against shifting and tipping
over.

Storage

CAUTION
Risk of personal injury or damage!
Consider the weight of the appliance when storing it.
Storing the Appliance
 Park the machine on an even surface.
 Engage the spray lance in its compartment.
 Insert the trigger gun in its holder.
 Stow away the mains cable, the high-pressure
hose and accessory on the appliance.
Prior to extended storage periods, as during the winter,
also observe the instructions in the Care section.
Frost protection
ATTENTION
Appliances and accessories that are not completely
drained can be destroyed by frost. Completely drain ap-
pliance and accessories and protect them against frost.
To avoid damage:
 Completely drain all water from the appliance:
Switch the appliance on with detached high pres-
sure hose and detached water supply (max. 1 min-
ute) and wait, until no more water exits at the high
pressure connection. Turn off the appliance.
 Store the appliance and the entire accessories in a
frost free room.

Care and maintenance

DANGER
Risk of electric shock.
 Prior to all work on the appliance, switch off the ap-
pliance and pull the power plug.
Care
Clean the sieve in the water connection
Clean the sieve in the water connection regularly.
ATTENTION
The sieve must not be damaged.
 Remove coupling from the water connection.
Illustration
 Pull the sieve out using flat pliers.
 Clean the sieve under running water.
 Reinsert the sieve into the water connection.
Cleaning the detergent filter
 Remove filter from suction hose for detergent and
clean under running water.
All manuals and user guides at all-guides.com
The appliance is maintenance free.
You can rectify minor faults yourself with the help of the
following overview.
If in doubt, please consult the authorized customer ser-
vice.
Risk of electric shock.
 Prior to all work on the appliance, switch off the ap-
 Pull on the lever of the trigger gun; the device will
 Check whether the voltage indicated on the type
 Check the mains connection cable for damages.
 Appliance ventilation: Switch the appliance on with
 Check the water supply.
 Pull out the sieve in the water connection using flat-
 Clean high-pressure nozzle: Remove dirt and de-
 Check water flow quantity.
 Slight leakage from the appliance pump is normal.
 Detach spray lance from the trigger gun. Work only
 Clean the detergent suction hose filter.
 Check the detergent suction hose for kinks.
– 5
EN
Maintenance

Troubleshooting

DANGER
pliance and pull the power plug.
Appliance is not running
switch on.
plate corresponds to the voltage of the mains sup-
ply.
Pressure does not build up in the appliance
the high-pressure hose detached and operate
(max. 2 minutes) until the water exits the high-pres-
sure connection without bubbles. Switch off appli-
ance and reconnect high-pressure hose.
nose pliers and clean under running water.
Strong pressure fluctuations
bris from the nozzle bore, using a needle and rinse
through with water from the front.
Appliance is leaking
If the leakage increases contact the authorized
customer service.
No detergent infeed
with the trigger gun.
9