Bellman & Symfon BE1441 Manual Del Usuario página 36

70
Battery backup
Battery backup
Getting started
Remove the battery slip on the bottom

of the unit before use.
Please charge the unit for 24 hours to

ensure full backup time.
Replacing batteries
(Done by the operator)
Remove the screw on the bottom of the

unit to exchange the batteries.
BE1443
BE1443
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Use only 4x1.2VNiMH 900AAA Lexel

rechargeable batteries to ensure full
backup time.
Smoke detector supervision
Pairing a smoke detector with the Flash receiver
1 2
5 s
3 s
Press and hold the test
Press (9) and hold the
 
top button for 5 seconds. button on the smoke detec-
- tor for more than 3 seconds.

dicates that it is ready by Release the button.

switching between the

green and the yellow LED indicate that pairing was
light. successful by switching
Release the top button. between the orange, green,

yellow and red LED lights
three times
BE1443
This menu shows the

position of the smoke
detector.
Attach the corre-

sponding label (pro-
vided with each smoke
detector) on the smoke
detector unit so you can
easily identify it later.
.
71
CZ
DE
DK
ES
FI
FR
GB
GR
HU
IT
NL
NO
PL
PT
SE
SRB
APP