General Instructions - JANE MATRIX LIGHT 2 Manual Del Usuario

_GENERAL INSTRUCTIONS

In order to protect your baby adequately and to ensure their comfort and stability in the car, the following
instructions must be strictly followed:
Your MATRIX LIGHT safety seat can be installed in both the front
seat, if it does not have an airbag, and in the back seat of your car.
Either way, we advise you to install it in the back seat. If you posi-
tion it in the front seat of the car, this must NOT have an AIRBAG,
or the airbag must be disconnected.
It is only suitable for cars fitted with three anchoring point auto-
matic belts, approved according to Regulation ECE-16 or other
equivalent rules. DO NOT use with a two anchoring point belt.
Not all safety systems are exactly the same, so we advise that
you check your MATRIX LIGHT in the car in which it is going to
be fitted.
It is very important not to use second-hand products, as JANÉ
can only guarantee complete safety with items used by their first
buyer. JANÉ recommends that you replace your MATRIX LIGHT
safety seat with a new one if it has been subjected to violent stres-
ses in an accident.
18 EN
Check that all the straps are in the correct position and duly ad-
justed to your MATRIX LIGHT. Make sure that none of the straps
are twisted. The child must understand that he must not play with
the straps or fasteners under any circumstances.
For your baby's proper development, we advise you not to over-
use the safety seat in the seated position on long journeys. Let
the baby rest frequently in a Moses basket or bed in the reclining
position.