Intended use
2.2
Operating the device safely
DANGER!
D
Do not touch exposed cables with your bare hands. This
especially applies when operating the device with an AC mains
power supply.
CAUTION!
!
Before starting the device, ensure that the power supply line
and the plug are dry.
NOTICE!
A
Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for the purpose.
Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the device is sufficiently far away from walls and other
objects so that the air can circulate.
Ensure that the ventilation slots are not covered.
Do not fill the inner container with ice or fluid.
Never immerse the device in water.
Protect the device and the cable against heat and moisture.
3
Intended use
The cooling device is suitable for cooling and warming foodstuffs.
There is a switch to change between heating and cooling modes.
The device has been designed for use with a 12 Vg on-board
power supply socket of a car (cigarette lighter), boat or caravan as
well as a 220-240 V AC mains supply.
CAUTION! Health hazard!
!
Please check if the cooling capacity of the device is suitable for
storing the food or medicine you wish to cool.
18
All manuals and user guides at all-guides.com
MF-05, MF-15
EN