MF-05, MF-15
➤ Plug the 220-240 V connection cable (fig. 1 3, page 3) into the AC volt-
age socket and connect it to the 220-240 V AC mains supply.
➤ Push the switch (fig. 2 3, page 3) on the control panel to "HOT" or
"COLD" to switch the device on.
✓ The refrigerator starts cooling/heating the interior and the appropriate
LED lights up.
➤ If you wish to switch the refrigerator off:
– Slide the switch (fig. 2 3, page 3) to the "OFF" position
➤ Pull out the connection cable.
NOTE
I
If you are not going to use the refrigerator for a long time, leave the
door slightly ajar to prevent unpleasant odours building up.
7
Cleaning and maintenance
WARNING!
!
Always disconnect the device from the mains before you clean and
service it.
NOTICE! Risk of damage
A
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
EN
All manuals and user guides at all-guides.com
Cleaning and maintenance
21