GINGKO Cube Plus Manual De Usuario Rápido página 4

Product Operation
12H or 24H Time Display Format
1. Long touch the T/S button until a beep, the time format will then change
between 12H or 24H.
2. When the clock is in 12H display format, a dot will appear on the top left
of the time screen to indicate PM time.
Stopwatch
1. Flip the clock to the STOPWATCH/ VERTICAL CLOCK side to activate the
stopwatch, the stopwatch will then start counting up in seconds.
2. Short touch the STOPWATCH to pause or resume the time.
Vertical Clock
1. Long touch the STOPWATCH/ VERTICAL CLOCK to switch to vertical
clock display. The time will be displayed vertically. To change it back to
horizontal time display, flip it back to the alarm
Timer
1. Flip to the TIMER side of the clock, short touch or long touch to scroll up
faster to set the timer in minutes.
2. The screen will start flashing after 5 seconds and countdown will start.
OFF
1. Flip the clock to the OFF side to completely deactivate the alarm. The
screen will show OFF for 2-3 seconds then it will revert back to time display.
Snooze and Alarm Operation
1. To snooze, simply touch any of the touch buttons and the alarm will be
snoozed for 5 minutes. When snooze is activated, the dot on the bottom
right will be flashing.
2. To turn off alarm completely, either flip the clock to the
long touch on any of the touch buttons to turn snooze off.
3. To turn alarm on again for the next day, you will need to flip the clock
over to ALARM side where all the touch buttons are located.
side.
OFF
side or