Onkyo HT-RC660 Manual Básico página 14

6
Using the multi-zone function
The function allows you to connect the unit with an audio
equipment placed in a separate room so that you can enjoy
audio of the connected equipment even if you are staying
in a different room. It is possible to perform playback in
the main room and a separate room at the same time, for
example by playing the Blu-ray Disc player in the main room
where the unit is placed while playing Internet radio in a
separate room. It is also possible to perform playback only
in a separate room.
In a separate room, you can enjoy sound from an external
device connected to the analog audio input jacks of the
unit, sound from the "NET", "USB" or "BLUETOOTH"
source, and the AM/FM broadcasting.
As for analog audio input, it is possible to play the
same source or different sources in the main room and
separate room.
As for the "NET", "USB" and "BLUETOOTH", you cannot
select different audio sources for the main room and
separate room. For example, if "NET" has been selected
in the main room and then "USB" is selected as playback
source in the separate room, the input in the main room
will change to "USB" accordingly.
When listening to AM/FM broadcasting, you cannot select
different stations for the main room and separate room.
Therefore broadcasting of the same station will be heard
in the both rooms.
Connecting with Player
To output audio of the Blu-ray Disc player or such other
player as the source of Zone playback, it is necessary to
connect the RCA audio output jacks of the player and the
analog audio input jacks of the unit using the analog audio
cable.
AUDIO
OUT
14
All manuals and user guides at all-guides.com
Output to multi-zone is not possible if the connection is
only with HDMI cable or digital cable.
Analog audio output setting may be necessary on the
player.
Making multi-zone connection
Connecting an pre-main amplifier in another
room
You can enjoy 2 ch stereo playback in the other room
during playing 7.1 ch in the main room.
Connect the ZONE 2 LINE OUT jacks of the unit and the
line-in jacks of the pre-main amplifier in a separate room
with an analog audio (RCA) cable. In a separate room, you
can enjoy sound from an external audio device connected
to the analog audio input jacks of the unit, sound from the
"NET", "USB" or "BLUETOOTH" source, and the AM/FM
broadcasting.
Zone 2
The volume should be adjusted with the pre-main
amplifier used in the separate room.
Connecting speakers in another room
It is possible to directly connect the speakers in another
room without an amplifier. Connect the speakers in another
room to the ZONE2 speaker terminals of the unit using
speaker cables. Note that 5.1 ch will be the maximum in the
main room during Zone 2 playback. In a separate room, you
can enjoy sound from an external audio device connected
to the analog audio input jacks of the unit, sound from the
"NET", "USB" or "BLUETOOTH" source, and the AM/FM
broadcasting.
Step 3:
Change the setting: Press RCV and then HOME on the
remote controller, select "Setup" - "2.Speaker Setup" -
"Speaker Settings" and set "Powered Zone2" to "Yes", and
press ENTER on the remote controller.
Zone 2
Adjust the volume on this unit. To adjust the volume,
press ZONE2 on the remote controller and adjust with
VOL / . You can mute the sound by pressing MUTING.
Playing Back