1. Manuales
  2. Marcas
  3. OMG Manuales
  4. Equipos de Construccion
  5. RhinoBond
  6. Manual del propietário

OMG RhinoBond Manual Del Propietário

Ocultar thumbs Ver también para RhinoBond:
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
Non-penetrating fastening system
for commercial roofing
Now with advanced OptiWeld Technology for
optimum plate bonding and performance!
153 BOWLES ROAD, AGAWAM, MA 01001 USA
800 . 633 . 3800 413 . 789 . 0252 RHINOBOND.COM
IMPORTANT!
Save this manual
and read it in full
before use.

Publicidad

Tabla de contenido
loading

Manuales relacionados para OMG RhinoBond

Resumen de contenidos para OMG RhinoBond

  • Página 1 Now with advanced OptiWeld Technology for optimum plate bonding and performance! IMPORTANT! Save this manual and read it in full 153 BOWLES ROAD, AGAWAM, MA 01001 USA before use. 800 . 633 . 3800 413 . 789 . 0252 RHINOBOND.COM...

  • Página 2: Tabla De Contenido

    11 Manual Calibration used to revolutionize industrial and consumer applications. While RhinoBond is a safe, tested tool, we caution you to be sure that every member of your crew has a 13 Menu Settings & Help thorough understanding of the RhinoBond System before attempting to use it. Read, understand and follow 16 EC Declaration of Conformity all instructions.

  • Página 3: Safety Instructions

    Read and follow all instructions before using the RhinoBond Induction Welding Tool. Failure to follow all instructions could result in property damage, electric shock, death or serious personal injury. This manual does not cover all possible conditions that may occur. Contact OMG Roofing Products about issues that are not addressed in this manual, or that you do not understand.
  • Página 4 This tool is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. CAUTION • In addition to the safety instructions in this manual, OMG Roofing Products recommends that all roof top workers follow the safety guidelines outlined in the OSHA booklet called “Protecting Roofing Workers” available at www.osha.gov/Publications/OSHA3755.pdf...

  • Página 5: Intended Use

    P O W E R R E Q U I R E M E N T S C H A RT The RhinoBond Tool is designed to operate on universal power, from 100 to 240 Volt sources. See the power requirements chart below for your region.
  • Página 6 T H E R H I N O B O N D SYS T E M RhinoBond with OptiWeld Tool Heat Sinks with carrying case (6 included with a carrying case) Handle Activation Power Cord Button Touchscreen Display Height Adjustment for Handle Induction Coil RhinoBond Owner’s Manual - Page 6...

  • Página 7: Safe Start Up And Shut Down

    RhinoBond is compatible with polyisocyanurate, mineral wool, and hard cover boards as well as any insulation that will not melt by the induction welding process. When using RhinoBond over XPS or EPS, use a minimum 1/4-in. (6 mm) thick cover board or 4-in. (102 mm) diameter cardboard discs under each plate to protect the insulation from melting.

  • Página 8: Tool Operation

    GET COMFORTABLE! You are likely going to be using the RhinoBond Tool for several hours at a time. Make sure that the tool is set for your height and comfort level. Adjust the handle height of the RhinoBond tool by loosening the clamps on both sides of the handle.

  • Página 9: Automatic Calibration

    The display will indicate the tool is in activation mode and show a progress bar. When the weld is complete, the RhinoBond tool will emit a beep, provided that the sound is turned on (see Page 11), and display the “Activation Done” screen.
  • Página 10 The image to the left shows a 100% bond. If you do not get a 100% bond, use the OptiWeld Adjustment feature to adjust the target Energy Setting to optimize the weld. See ‘Manual Calibration’ information on Page 11 for details. 100% bond RhinoBond Owner’s Manual - Page 10...

  • Página 11: Manual Calibration

    Press the trigger on the handle to activate the weld cycle. Once the weld is complete, the RhinoBond tool will emit a beep, provided that the sound is turned on (see pg 11) and display the”Activation Done” screen.
  • Página 12 M A N U A L C A L I B R AT I O N T E S T W E L D S When calibrating the RhinoBond Tool manually, it’s important to set -- and test -- the tool at several Energy Levels to determine which setting provides the best weld.

  • Página 13: Menu Settings & Help

    Once the log has been reviewed, press the back arrow (<) to return to the previous screen. The “Highest Line Voltage” indicates the highest line voltage seen by the tool since the last factory reset. RhinoBond Owner’s Manual - Page 13...
  • Página 14 Press the “Instructions” button to access a link to a digital version of the RhinoBond user manual. Use a smartphone to read the QR code which will open an online RhinoBond manual.
  • Página 15 From the main “Menu,” press the “Help” button to review the “Troubleshooting” tips, and error message descriptions. Press any of the error message buttons to get more information and recommendations. Press the back arrow (<) to return to the previous screen. Trigger RhinoBond Owner’s Manual - Page 15...

  • Página 16: Ec Declaration Of Conformity

    E C D E C L A R AT I O N O F C O N F O R M I T Y This is the Manufacturer’s Declaration of Conformity which declares that the RhinoBond Induction Welding Tool, model number(s) listed below, complies with the essential health and safety requirements of the European Community Directives, including the latest amendments, as provided below.

Tabla de contenido